Insteon SwitchLinc Dimmer 100-277VAC (dual band) (2478D) Q Manuel d'utilisateur télécharger pdf

INSTEON Limited Warranty – INSTEON warrants to original consumer of this product for a period of 2 years from

date of purchase, this product will be free from defects in material and workmanship and will perform in substantial

conformity with its Owner's Manual. Warranty shall not apply to defects caused by misuse or neglect.

INSTEON, 16542 Millikan Ave., Irvine, CA 92606, 800-762-7845, www. Insteon.com

Quick Start Guide

SwitchLinc

™ Dimmer 240V, 50/60Hz (Dual-Band)

INSTEON

Remote Control Dimmer Switch

Model: 2478D

About SwitchLinc Dimmer 240V, 50/60Hz

Congratulations on purchasing the SwitchLinc Dimmer 240V. This

internationally-compatible version of our bestselling SwitchLinc Dimmer

features automatic 50/60Hz detection of the AC power frequency and flexible

100 - 277VAC support, allowing operation in a variety of electrical

environments.

Preparation

Installation should be performed only by a qualified electrician or by a

homeowner who is familiar and comfortable with electrical circuitry. If you have any questions regarding installation, we

suggest consulting an electrician. If you have any questions regarding setup, contact the INSTEON Support Line.

What’s in the box?

• SwitchLinc Dimmer • Four wire nuts

Tools Needed

• Slotted screwdriver • Phillips screwdriver

• Wire cutter / stripper • Voltage Meter

Installation

1) Turn off circuit breaker(s) or remove fuse(s) feeding wall box

2) Use a voltage meter to verify that power is off

3) Remove wallplate from switch and unscrew switch you are replacing and

gently pull out

4) Turn breaker(s) back on

5) Use a voltage meter to identify line and load wires connected to switch

6) Identify Neutral and ground wires

7) Turn breaker(s) back off

8) Connect wires as indicated. Confirm firm attachment with no exposed wire.

9) Gently place SwitchLinc into wall box, orienting unit with the LED bar on left

10) Screw SwitchLinc into place

11) Turn breaker(s) back on

SwitchLinc LED bar and connected light will turn on

12) Verify SwitchLinc is working properly by tapping SwitchLinc’s paddle

turning light (load) on and off

13) Reinstall the wallplate

Note: For 3-way/4-way circuit installations, refer to the Owner’s Manual

Note: When mounting in a multiple-ganged junction box, SwitchLinc

Dimmer is de-rated for 200-watts less for each immediately adjacent

dimmer installed. For example, 600W load control becomes 400W with

another dimmer to the immediate right or left. Use a triple-gang box with

a mechanical switch in the center to avoid de-rating.

SwitchLinc Wire

Wall Box Wires

Bare copper

Ground

(commonly bare,

green wire or

green screw)

White

Neutral

(commonly

white)

Red

Load

(light, fan, etc.)

Black

Line

(100 - 277VAC

to Ground)

LED bar

brightness

indicators

Paddle top

(on/brighten)

Paddle bottom

(off/dim)

Set button

1 2

Résumé du contenu

Page 1 - Quick Start Guide

INSTEON Limited Warranty – INSTEON warrants to original consumer of this product for a period of 2 years from date of purchase, this product will be f

Page 2 - FCC/UL and ETL/UL Statements

INSTEON Limited Warranty – INSTEON warrants to original consumer of this product for a period of 2 years from date of purchase, this product will be f

Commentaires sur ces manuels

Pas de commentaire

Insteon SwitchLinc Dimmer 100-277VAC (dual band) (2478D) Q Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Insteon SwitchLinc Dimmer 100-277VAC (dual band) (2478D) Q. INSTEON SwitchLinc Dimmer 100-277VAC (dual band) (2478D) Quick Start User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Insteon SwitchLinc Dimmer 100-277VAC (dual band) (2478D) Q